Kuhner developed the RC2-X specifically for large capacity shaking. It will accept two large C-size trays (800 x 660 mm) which can be fitted with Erlenmeyer flask clamps, test-tube holders or sticky mats etc.
5 year warranty
Large shaking capacity
Thanks to the Kuhner direct drive, the RC2-X can be run continuously without requiring maintenance. As standard, the orbital shaking diameter is set at 50mm. Other user specific diameters are possible. This shaker has a maximum speed of 400 rpm making it suitable for all applications.
50 mm (orbital motion)
± 0.5 rpm
2x C-tray (800x660 mm)
220 - 240 V / 50-60 Hz
190 - 210 V / 50-60 Hz
110 - 120 V / 50-60 Hz
95 - 105 V / 50-60 Hz
Technical data subject to change
IQ-OQ (Installation Qualification and Operation Qualification) is an equipment qualification according to GMP procedure. Kuhner offers this service which can also be carried out at the customer’s premises.
The universal tray can be fitted with clamps for Erlenmeyer flasks, test tube holders, microtiter plates, or custom made holders to suit your requirements. Rearranging these clamps and holders is quick and simple.
Universal tray CU (800 x 660 mm)
The clamps are riveted onto this tray and cannot be removed. It offers maximum stability and will often hold a larger number of flasks than an universal tray. These trays are available in a variety of flask clamp sizes from 25 to 6000ml.
Number of clamps
Kuhner has designed trays specifically for microtiter plates. Handles at the front of the tray open and close the special clamping mechanism allowing plates to be loaded and unloaded. Trays of different heights (22, 47 and 77mm) allow the stacking of up to four microtiter plates. The trays are available in three sizes and suitable for all types of plates (deep well, low well, 24, 48 and 96 well).
Number of clamps
35 to 70
35 to 140
35 to 210
The user-friendly Kuhner Insight software was developed for supervision, monitoring, and recording of data. The software is easy to operate. More.
Yes, no other equipment is required.
For Kuhner, the quality and durability of their shakers and bioreactors have always been the topics with the highest priority. On this account, Kuhner products have also proven their worth worldwide under GMP requirements. Documentation, development and production along the full life cycle of our products are continuously enhanced to match the requirements of 21 CFR and GAMP 5.
The world's most reliable shaking machines built in-house in Switzerland.